click to enlarge
tap to enlarge
Side Stand Switch Eliminator ST-03
€25.00
Description
Description:
- All new bikes come with a sensor on the side stand / kickstand. Its mission is to prevent starting with a gear engaged and start with the kickstand unfolded.
- This can cause serious problems on an enduro or supermotard motorcycle, because it cuts off the ignition as soon as it does not detect the position of the stand.
- With this dongle a signal is sent to the control unit so that it detects that the stand is always removed, avoiding all the previous problems.
Advantages
Advantages:
- Prevents the motorcycle from stopping due to a sensor malfunction.
- Replace faulty sensors.
- Easy installation, unplug the sensor and put on the dongle.
- Possibility of eliminating the stand for circuit motorcycles with its consequent weight reduction.
Additional information:
- Sealed OEM connector.
- Plug & Play.
- Maximum quality and guarantee.
- All our products are designed for use in competition and/or on closed circuits.
Installation
Installation:
- Installation is simple, follow the sensor cables that you will find next to the side stand to its connector, disconnect and install the dongle. Later you can remove the entire kickstand system from the bike.
- Click here to view our installation guides.
Compatibility
Compatible models:
-
KTM:
- 790 DUKE > 2018 - 2023
- RC 125 > 2017 - 2023
- RC 200 > 2018 - 2023
- RC 390 > 2017 - 2023
- 125 Duke > 2017 - 2022
- 200 Duke > 2020 - 2023
- 250 Duke > 2017 - 2022
- 390 Duke > 2017 - 2023
- 790 Adventure > 2019 - 2023
- 890 Duke R > 2020 - 2023
- 390 Adventure > 2020 - 2023
- 890 Adventure > 2020 - 2023
- 250 Adventure > 2021 - 2022
-
HUSQVARNA:
- 401 VITPILEN/SVARTPILEN > 2018 - 2023
- 250 VITPILEN/SVARTPILEN > 2020 - 2023
- 125 VITPILEN/SVARTPILEN > 2021 - 2023
- 200 VITPILEN/SVARTPILEN > 2020 - 2023
- 901 NORDEN > 2022 - 2023
