Fuel Dongle PP-29

Description

Description:

• This kit serves Delete and Emulate The O2 probe located in the exhaust manifold and correct the air/gasoline mixture.
• Today's engines are designed to meet very strict emission regulations. To do this, they reduce the stoichiometric mixture (AFR) in a certain RPM range, making the engine run lean on gasoline. A lean-burn engine will be unstable, jerk, overheat, and have a noticeable loss in performance.
• *This model of FuelDongle may momentarily illuminate the check engine light, then disappear.

Advantages

Advantages:

• Elimination of jerks, rattles and instabilities at low RPM.
• Improves engine response at low and medium RPM.
• Reduced exhaust and engine temperature.
• Sets the ideal AFR for engine operation.
• Plug & Play.

Additional information:

• Does not increase fuel consumption.
• No engine fault appears.
• Compatible with exhausts with and without catalyst.
• Required when removing catalytic converter.
• Mandatory when installing external switchboards.
• Sealed OEM connectors.
• All our products are designed for use in competition and/or on closed circuits.

Operation

Technical operation:

• The ECU is set to have too lean AFR (Air Fuel Ratio), exactly 14.7 at <5000 RPM and 20% throttle. Once the engine has reached its operating temperature, the O2 sensors provide information to the engine unit and be able to maintain the mixture at 14.7.
• Due to this, there is an increase in the temperature of the engine, of the exhaust system added to jerks and rattles during the march.
• Plugging in one of our dongles sends a signal to the control unit to lower the mix one notch and set the AFR to 13.8. All this translates into a better operation of the motorcycle.

Installation

Installation:

• Installation is simple, just follow the wires from the O2 sensor into the exhaust manifold. You will find a connector, unplug it and put the fuel dongle. Optionally you can remove the O2 probe and put the cap with the copper gasket.
• Click Here To see our Installation guides.

Compatibility

Compatible Models:

• HONDA :
  • CB 1100 /EX / RS > 2013 - 2016
  • CRF 1000 L AFRICA TWIN > 2016 - 2017
  • VFR800X Crossrunner > 2011 - 2020
  • CB 650 F / R > 2014 - 2020
  • CBR 500 > 2013 - 2018
  • CBR 600 RR > 2013 - 2023
  • CBR 650 F R > 2014 - 2020
  • CB 500 F X > 2013 - 2018
  • VFR 800 F > 2014 - 2019