click to enlarge
tap to enlarge
Fuel Dongle SG-03
€60.00
Description
Description:
- This dongle is installed in the intake temperature sensor for Emulate a temperature of-20 °C over the actual temperature.
- Today's engines are designed to meet very strict emission regulations. To do this, they reduce the stoichiometric mixture (AFR) in a certain RPM range, making the engine go Poor Of gasoline. An engine with a Poor mixture will be unstable, will give jerks, will overheat and will have a noticeable loss of performance.
Advantages
Advantages:
- Improves throttle response.
- Improve acceleration.
- Enriches the air/fuel mixture.
- Eliminates jerks and rattles at low to mid RPMs due to lean mixture.
- Plug & Play.
Additional information:
- The Tenere 700 uses the same temperature sensor for fuel injection calculations as it does for the dashboard temperature reading. (Most other brands have separate sensors.) This means that the dashboard display will show 20°C lower than the actual ambient temperature when you install the FuelDongle.
- You can increase fuel consumption between 0.2-0.5l/100km.
- No engine fault appears.
- Compatible with exhausts with and without catalyst.
- Sealed OEM connectors.
- All our products are designed for use in competition and/or on closed circuits.
Operation
Technical operation:
- Today's ECUs are scheduled to work on an open/closed loop. This means that it takes signals from several sensors distributed throughout the engine to adjust the injection.
- The engine maps established in the ECU work in such a way that the lower the ambient temperature, the more amount of gasoline they have to inject.
- Thanks to this operation, this dongle acts on the IAT or intake temperature sensor, causing the ECU to read -20ºC with respect to the actual temperature. That is, if there is 30ºC in the intake box, the ECU will read 10ºC.
- With this we managed to raise the fuel injection around +6% in the entire RPM range regardless of the ambient temperature there is.
- This translates into a significant power increase and improved jerk and rattle.
Installation
Installation:
- Installation is simple, locate the IAT sensor in the intake box, disconnect the cable and insert the dongle.
Compatibility
Compatible Models:
- YAMAHA :
- Tenere 700 > 2019 - 2024
- XSR 700 > 2016 - 2024
- MT-07 > 2014 - 2024
- Tracer 700 /GT > 2016 - 2024
- MT-09 /SP > 2013 - 2024
- Tracer 900 / FJ-09 /GT > 2015 - 2024
- Niken > 2018 - 2024
- FZ8 > 2010 - 2016
- XJ6 / Diversion > 2009 - 2016
- YZF R6 > 2006 - 2024
- MT-10 /SP > 2016 - 2024
- FZ1 FAZER 1000 > 2006 - 2024
- XJR 1300 > 2007 - 2019
- FJR 1300 >2006 - 2024
- MT-01 > 2005 - 2012
- V-MAX 1700 > 2009 - 2020
- XTZ 1200 Super Tenere > 2010 - 2024
- Bolt R Spec 950 > 2014 - 2024
- XVS 1300 A Midnight Star > 2007 - 2017
