click to enlarge
tap to enlarge
Fuel Dongle SG-11
€65.00
Description
Description:
- This dongle is installed in the ambient temperature sensor to emulate a temperature of -20ºC above the actual temperature.
- Today's engines are designed to meet very strict emission regulations. To do this, they reduce the stoichiometric mixture (AFR) in a certain RPM range, causing the engine to run lean on gasoline. An engine with a lean mixture will be unstable, jerk, overheat, and have a noticeable loss of performance.
Advantages
Advantages:
- Improves throttle response.
- Improve acceleration.
- Enriches the air/fuel mixture.
- Eliminates jerks and rattles at low to mid RPMs due to lean mixture.
- Plug & Play.
Additional information:
- The Multistrada 1400 uses the same temperature sensor for fuel injection calculations as for the temperature reading on the dashboard. (Most other brands have separate sensors.) This means that the dashboard display will show 20°C lower than the actual ambient temperature when the FuelDongle is installed.
- You can increase fuel consumption between 0.2-0.5l/100km.
- No engine fault appears.
- Compatible with exhausts with and without catalyst.
- Sealed OEM connectors.
- All our products are designed for use in competition and/or on closed circuits.
Operation
Technical operation:
- Today's ECUs are programmed to work in an open/closed loop. This means that it takes signals from several sensors distributed throughout the engine to adjust the injection.
- The engine maps established in the ECU work in such a way that the lower the ambient temperature, the more amount of gasoline they have to inject.
- Thanks to this operation, this dongle acts on the IAT or intake temperature sensor, causing the ECU to read -20ºC with respect to the actual temperature. That is, if there is 30ºC in the intake box, the ECU will read 10ºC.
- With this we managed to raise the fuel injection around +6% in the entire RPM range regardless of the ambient temperature there is.
- This translates into a significant power increase and improved jerk and rattle.
Installation
Installation:
- Installation is simple, locate the IAT sensor in the intake box, disconnect the cable and insert the dongle.
Compatibility
Compatible Models:
- DUCATI:
- Multistrada 1200 > 2010 - 2014
