Fuel Dongle PP-04 — FuelDongle.es®

Custom Event Setup

×

Click on the elements you want to track as custom events. Selected elements will appear in the list below.

Selected Elements (0)

    Fuel Dongle PP-04

    €30.00

    Description

    Description:

    • This kit is for eliminate and emulate the O2 probe located in the exhaust manifold and correct the air/fuel mixture.
    • Today's engines are designed to meet very strict emissions regulations. To do this, they reduce the stoichiometric mixture (AFR) at a certain RPM range, causing the engine to run lean on fuel. An engine with a lean mixture will be unstable, will jerk, will overheat and will have a noticeable loss of performance.

    Advantages

    Advantage:

    • Elimination of jerks, rattles and instabilities at low RPM.
    • Improves engine response at low and medium RPM.
    • Reduced exhaust and engine temperature.
    • Sets the ideal AFR for engine operation.
    • Plug & Play.

    Additional Information:

    • Does not increase fuel consumption.
    • No engine fault appears.
    • Compatible with exhausts with and without catalyst.
    • Required when removing catalytic converter.
    • Mandatory when installing external switchboards.
    • Sealed OEM connectors.
    • Stainless steel probe cap.

      Functioning

      Technical performance:

      • The engine control unit is set to have a lean AFR (Air Fuel Ratio), exactly 14.7 at <5000 RPM and 20% throttle. Once the engine has reached its operating temperature, the O2 sensors supply information to the engine control unit to keep the mixture at 14.7.
      • Due to this, there is an increase in the temperature of the engine, of the exhaust system, added to jerks and rattles during the march.
      • Plugging in one of our dongles sends a signal to the control unit to lower the mix one notch and set the AFR to 13.8. All this translates into a better operation of the motorcycle.

      Installation

      Installation:

      • Installation is simple, follow the O2 probe wires into the exhaust manifold. You will find a connector, unplug it and put the Fuel Dongle. Optionally you can remove the O2 probe and put the plug with the copper gasket. 
      • Click here to see our installation guides.

      Compatibility

      Compatible Models:

      • YAMAHA:
        • Tracer 900 / FJ-09 /GT > 2015 – 2020
        • FYR 1300 > 2006 – 2023
        • FZ1 Fazer 1000 > 2006 – 2014
        • FZ6 Fazer 600 > 2007 – 2009
        • MT-01 > 2005 - 2012
        • MT-09 > 2014 - 2020
        • V-Max 1700 > 2009 - 2018
        • X-MAX 125 Skycruiser > 2006 - 2009
        • XSR 900 > 2016 - 2020
        • YZF R6 > 2006 - 2016
        • XV 1900 A Midnight Star > 2006 – 2014
        • XVS 1300 A Midnight Star > 2007 - 2017
        • V Star 950 > 2009 - 2017
        • T-MAX 500 / 530 > 2004 - 2020
        • Niken > 2018 - 2020
        • Bolt R Spec 950 > 2014 - 2023
        • WR 450 F > 2012 - 2015
      • KAWASAKI:
        • ER-6 N/F > 2006 - 2016
        • Z1000 / SX > 2007 - 2020
        • Z750 > 2006 - 2012
        • Z800 / E > 2013 - 2016
        • Z900 / Z900RS > 2017 - 2020
        • Vulcan 2000 > 2004 - 2010
        • Versys 1000 > 2012 - 2018
        • Versys 650 > 2007 - 2014
        • Ninja 400 > 2011 - 2016
        • Ninja 1000 > 2011 - 2019