Fuel Dongle PP-60

Description

• This kit allows Remove the oxygen sensor or lambda probe from the exhaust .

• Oxygen sensors or lambda probes installed in the exhaust Limit engine performance Since its function is to control gas emissions.

• Due to the Pollution regulations , The stoichiometric mixture (AFR) is Lift In a certain RPM range, making the engine go Poor gasoline .

• An engine with a Poor mix Will be Unstable, will give jerks, overheat and have a noticeable loss of performance.

Advantages

• Removal Of pulls, rattles and instabilities at low RPM.
• Improvement The engine response at low and medium RPM.
• Reduces The exhaust and engine temperature.
• Set A correct AFR for engine operation.
• Plug & Play .

Additional information:

• Does not increase Fuel consumption.
• Does not appear Engine failure.
• Compatible With exhausts with and without catalyst.
• Connectors OEM Sealed.
• All our products are designed for use in competition and/or closed circuits.

Functioning

• The engine control unit (ECU) is configured to have an AFR (Air Fuel Ratio) Too poor, exactly 14.7 to <5000 RPM and 20% throttle.

• Once the engine has reached its operating temperature, O2 sensors provide information to the motor unit and be able to keep the mixture at 14.7.

• Because of this, it occurs An increase in the temperature of the engine, of the exhaust system added to pulls and rattles while driving.

• By putting one of our Fuel Dongle A signal is sent to the command unit To lower the mix a point and set the AFR at 13.8 . This means that" We enrich "The mixture and translates In a better operation of the motorcycle.

Installation

Installation:

• Click Here To see our Installation guides.