click to enlarge
tap to enlarge
Fuel Dongle SG-04
€70.00
Description
Description:
- This dongle is installed on the intake temperature sensor to emulate a temperature of -20ºC over the real temperature.
- Today's engines are designed to meet very strict emissions regulations. To do this, they reduce the stoichiometric mixture (AFR) in a certain RPM range, causing the engine to go poor gasoline. An engine with a A lean mixture will be unstable, jerk, overheat, and experience a noticeable loss of performance.
Advantages
Advantage:
- Improves throttle response.
- Improve acceleration.
- Enriches the air/fuel mixture.
- Eliminates jerks and rattles at low to mid RPMs due to lean mixture.
- Plug & Play.
Additional Information:
- You can increase fuel consumption between 0.2-0.5l/100km.
- No engine fault appears.
- Compatible with exhausts with and without catalyst.
- Sealed OEM connectors.
- All our products are designed for use in competition and/or on closed circuits.
- On some Euro 5 motorcycles (2021 - 2024) it may give a cold fault when comparing the signal from the coolant temperature sensor with the IAT temperature sensor.
Functioning
Technical performance:
- Today's ECUs are programmed to work in an open/closed loop. This means that it takes signals from various sensors distributed throughout the engine to adjust the injection.
- The engine maps established in the ECU work in such a way that the lower the ambient temperature, the more amount of gasoline they have to inject.
- Thanks to this operation, this dongle acts on the IAT or intake temperature sensor making the ECU read -20ºC with respect to the real temperature. That is, if there is 30ºC in the intake box, the ECU will read 10ºC.
- With this we managed to raise the fuel injection around +6% in the entire RPM range regardless of the ambient temperature there is.
- This translates into a significant power increase and improved jerk and rattle.
Installation
Installation:
- Installation is simple, locate the IAT sensor in the intake box, disconnect the cable and insert the dongle.
- *On some Honda E5 and E5+ models, an engine failure warning may occur when comparing the coolant temperature with the ambient temperature when the motorcycle is at rest. This does not affect the operation of the FuelDongle, but it will illuminate the engine failure warning light.
Compatibility
Compatible Models:
- HONDA:
- MSX 125 > 2013 - 2024
- Monkey 125 > 2018 - 2024
- CRF 450 L > 2018 - 2024
- CBR 600 RR > 2013 - 2024
- CB 1000 R > 2018 - 2024
- CBR 1000 RR > 2014 - 2024
- CB 1100 > 2013 - 2024
- CTX 1300 > 2014 - 2019
- GL 1800 > 2018 - 2024
- Transalp 750 > 2023 - 2024
- CB 750 Hornet > 2023 - 2024
- CRF 1000 L AFRICA TWIN > 2016 - 2020
- CRF 1100 L AFRICA TWIN > 2020 - 2024
