Fuel Dongle SG-05 — FuelDongle.es®

Custom Event Setup

×

Click on the elements you want to track as custom events. Selected elements will appear in the list below.

Selected Elements (0)

    Fuel Dongle SG-05

    €75.00

    Description

    Description:

    • This dongle is installed on the intake temperature sensor to emulate a temperature of -20ºC over the real temperature.
    • Today's engines are designed to meet very strict emissions regulations. To do this, they reduce the stoichiometric mixture (AFR) in a certain RPM range, causing the engine to go poor gasoline. An engine with a A lean mixture will be unstable, jerk, overheat, and experience a noticeable loss of performance.

    Advantages

    Advantage:

    • Improves throttle response.
    • Improve acceleration.
    • Enriches the air/fuel mixture.
    • Eliminates jerks and rattles at low to mid RPMs due to lean mixture.
    • Plug & Play.

    Additional Information:

    • You can increase fuel consumption between 0.2-0.5l/100km.
    • No engine fault appears.
    • Compatible with exhausts with and without catalyst.
    • Sealed OEM connectors.
    • All our products are designed for use in competition and/or on closed circuits.

    Functioning

    Technical performance:

    • Today's ECUs are programmed to work in an open/closed loop. This means that it takes signals from various sensors distributed throughout the engine to adjust the injection.
    • The engine maps established in the ECU work in such a way that the lower the ambient temperature, the more amount of gasoline they have to inject.
    • Thanks to this operation, this dongle acts on the IAT or intake temperature sensor making the ECU read -20ºC with respect to the real temperature. That is, if there is 30ºC in the intake box, the ECU will read 10ºC.
    • With this we managed to raise the fuel injection around +6% in the entire RPM range regardless of the ambient temperature there is. 
    • This translates into a significant power increase and improved jerk and rattle. 

    Installation

    Installation:

    • Installation is simple, locate the IAT sensor in the intake box, disconnect the cable and insert the dongle.

    Compatibility

    Compatible Models:

    • KTM:
      • 125 Duke > 2011 - 2016
      • RC 125 > 2014 - 2020
      • 200 Duke > 2012 - 2022
      • RC 200 > 2014 - 2020
      • 250 Duke > 2015 - 2016
      • 250 Adventure > 2015 - 2016
      • RC 250 > 2012 - 2017
      • 390 Duke > 2013 - 2016
      • 390 Duke > 2021 - 2024
      • 390 Adventure > 2020 - 2026
      • 390 Enduro > 2025 - 2026
      • RC 390 > 2012 - 2023
    • HUSQVARNA:
      • 401 VITPILEN / SVARTPILEN > 2020 - 2024